Đế cho đầu báo thường Apollo 45681-201APO

Hãng sản xuất: Apollo

Nhà phân phối: Hathanh TDIC., JSC

Liên hệ Mr Dũng: 0933.689.666

Email: sales@pccchathanh.com

Giới thiệu sản phẩm:

- Apollo Series 65 Diode Base 45681-201

- The Series 65 Diode Base is designed for use with conventional systems that have manual call points and detector bases on the same circuit. The base is fitted with a schottky diode on the "L1 IN" and "L1 OUT" wiring terminals. This base can only be used with compatible control equipment.

Operation:

- All detectors in the Series 65 range fit into Series 60 standard mounting bases. The bases are of 100mm diameter and have five terminals marked according to their function: Line 1 in, line 1 out, line 2 in and out, remote indicator negative, earth. Detectors are polarity insensitive, so that identification of positive and negative lines is only required if a remote LED is fitted. An earth connection is not required for either safety or correct operation of detectors.

The earth terminal is provided for tidy termination of earthed conductors or cable screens and to maintain earth continuity where necessary. Bases have a wide interior diameter for ease of access to cables and terminals and there are two slots for fixing screws at a spacing of 51 to 69mm. Detectors fit into bases one way only and require clockwise rotation without push force to be plugged in.

- Key Features:

• Detector locking mechanism
• One way fit
• Easy to wire
• Contains an earth connector
• Continues to work during unauthorised removal of detectors

Brand Features:

• Wide-operating voltage of 9–33 V DC
• Wide-operating and storage temperature of -20°C to +60°C
• Can be used on security systems
• Electrically and mechanically compatible with Series 60

Proven detection performance

Read More

Nút ấn báo cháy địa chỉ Apollo 58100-908APO

Hãng sản xuất: Apollo

Nhà phân phối: Hathanh TDIC., JSC

Liên hệ Mr Dũng: 0933.689.666

Email: sales@pccchathanh.com

Giới thiệu sản phẩm:

- Apollo Discovery Manual Call Point with Isolator 58100-908APO

- A seven-segment DIL switch enables addressing of each call point at commissioning stage. When operated, the manual call point interrupts the polling cycle for a fast response. Bi-coloured LEDs indicate isolate and normal conditions.

- Discovery® is a range of high-specification, analogue addressable fire detectors and alarm devices. Discovery detectors offer effective false alarm management by a combination of EN 54 approved operating modes and sophisticated algorithms.

- Key Features:

•  ‘Plug and Play’ terminal connections for fast wiring
• Continuity link for wiring test before commissioning
• Reports an alarm in under 0.2 seconds
• Resettable element

Read More

Đầu báo nhiệt gia tăng Apollo series 65: 55000-122APO

Hãng sản xuất: Apollo

Nhà phân phối: Hathanh TDIC., JSC

Liên hệ Mr Dũng: 0933.689.666

Email: sales@pccchathanh.com

Giới thiệu sản phẩm:

- Apollo Series 65 A1R Heat Detector - 55000-122

- The Series 65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. There are 12 heat detectors in the Series 65 range designed to suit a wide variety of operating conditions. Apollo Series 65 smoke & heat detector range are a direct replacement for the earlier Series 60 devices. Series 65 detectors have a wide voltage range (9-33 volt DC) and can be integrated on to security systems when used with the 12 volt relay base (45681-508).
- The heat detector operates by using a matched pair of thermistors to sense heat. One thermistor is exposed to the ambient temperature, the other is sealed. In normal conditions, the two thermistors register similar temperatures, but, on the development of a fire, the temperature recorded by the exposed thermistor will increase rapidly, resulting in an imbalance of the thermistors and causing the detector to change to the alarm state.

A1R, BR and CR are Rate of Rise detectors, designed to detect a fire as the temperature increases, but they also have a fixed upper limit at which the detector will go into alarm if the rate of temperature increase has been too slow to trigger the detector earlier.

Key Features:

• Can be used for applications where smoke detectors are unsuitable
• Ideal for environments that are dirty or smoky under natural conditions
• Wide operating voltage
• Flashing LED and magnet operated test switch option
• Wide-operating voltage of 9–33 V DC
• Wide-operating and storage temperature of -20°C to +60°C
• Can be used on security systems
• Electrically and mechanically compatible with Series 60
• Proven detection performance

Read More

Đầu báo khói thường Apollo series 65: 55000-317APO

Hãng sản xuất: Apollo

Nhà phân phối: Hathanh TDIC., JSC

Liên hệ Mr Dũng: 0933.689.666

Email: sales@pccchathanh.com

Giới thiệu sản phẩm:

- Apollo Series 65 Optical Smoke Detector - 55000-317

- The Series 65 Optical Smoke Detector incorporates a pulsing LED located within the housing of the detector. The external detector moulding is identical to that of the ionisation detector but has an indicator LED which is clear in quiescent state but produces a red light in alarm. As part of the Apollo Series 65 Detector Range the 55000-317 Optical Conventional Smoke Detector offers a fire detection solution to many applications.  The detector can be used with most modern conventional fire alarm panels.

- The Apollo Series 65 conventional optical smoke detector (55000-317) uses an internal pulsing LED and a photo-diode at an obtuse angle. In the event of smoke entering the chamber, the light pulse from the LED will be scattered and registered by the photo-diode. The detector will then enter the alarm state and the indicator LED lights up. The Apollo Series 65 optical smoke detector housing is identical to that of the Apollo ionisation smoke detector but has an indicator LED which is clear in quiescent state but produces red light in alarm.

- Key Features:

• Wide operating voltage
• Advanced electronic technology
• Flashing LED option
• Magnetic test switch option
• Can be used on security systems
• Electrically compatible with Series 60
• Mechanically compatible with Series 60
• Proven detection performance
• Designed to meet approvals worldwide
• Range of bases available

Read More

Đế cách ly cho đầu báo thông minh Apollo 45681-284APO

Hãng sản xuất: Apollo

Nhà phân phối: Hathanh TDIC., JSC

Liên hệ Mr Dũng: 0933.689.666

Email: sales@pccchathanh.com

Giới thiệu sản phẩm:

- Apollo XP95 / Discovery Isolating Base – 45681-284APO

- The Isolating Base senses and detects short-circuit faults on Discovery loops and spurs.

- Key Features:

• Up to 20 detectors or their equivalent load, may be installed between isolating bases
• High brightness LED
• Detects wiring short-circuits

- Minimises disruption from short circuits

Read More

Đế cách ly tích hợp còi báo động Apollo 45681-277APO

Hãng sản xuất: Apollo

Nhà phân phối: Hathanh TDIC., JSC

Liên hệ Mr Dũng: 0933.689.666

Email: sales@pccchathanh.com

Giới thiệu sản phẩm:

- Apollo XP95 Integrated Base Sounder with Isolator – 45681-277APO

- The Integrated Base Sounder comprises of a base sounder with integral mounting base and is for use with Discovery or XP95 ranges. It is designed for indoor use. The base sounder is line powered and needs no external power supply. It operates at 17–28V DC and is polarity-sensitive.

- The integrated base sounder is moulded in polycarbonate and has stainless steel contacts that accept solid or stranded cables of up to 2.5mm. The Base Sounder comprises of a base sounder with integral mounting base and is for use with Discovery or XP95 ranges. It is designed for indoor use.

- Key Features:

• Two tones
• Two volume ranges 55-75dB(A) and 75-91dB(A)
• Individual and group addressing
• Unique acoustic self-test
• Built-in isolator

Read More

Tủ trung tâm báo cháy 4 Zone HAES ECL-4

Hãng sản xuất: HAES

Nhà phân phối: Hathanh TDIC., JSC

Liên hệ Mr Dũng: 0933.689.666

Email: sales@pccchathanh.com

Giới thiệu sản phẩm:

HAES ECL-4 ECLIPSE 4 ZONE FIRE ALARM PANEL

The Haes ECL-4 is a 4 zone fire alarm control panel.  This panel features a robust metal enclosure and is capable of supporting both conventional type and sav-wire type equipment.

Read More