Nút ấn địa chỉ FSM500K

Hãng sản xuất: Notifier
Nhà phân phối: Hathanh.jsc
Liên hệ Mr Đức: 093.66.88.116
Email: kinhdoanhhathanh.jsc@gmail.com

Giới thiệu sản phẩm

 - The Notifier Inertia Fire Systems FSM500K Flashscan™ Addressble Manual Call Point (MCP) or Break Glass Alarm (BGA) is designed to be used as a component of a Fire Control System using Notifier Inertia analogue addressable devices.

- Rotary decade switches are provided for setting the devices address on the two wire communications loop.

- The FSM500K provides both signaling of an alarm to the Fire Indicator Panel and local LED indication of activation.

- The addressability of the FSM500K enables the control panel to provide fire fighters with a pinpoint location of where the alarm activation originated from.

- The FSM500K requires compatible addressable communications to function properly. The sensor will support either Flashscan™ or CLIP (Classic Loop Interface Protocol) modes.

Read More

Module cách ly lỗi ISO-X

Hãng sản xuất: Notifier
Nhà phân phối: Hathanh.jsc
Liên hệ Mr Đức: 093.66.88.116
Email: kinhdoanhhathanh.jsc@gmail.com

Giới thiệu sản phẩm

The NOTIFIER ISO-X Fault Isolator Module is used with the NFS-3030, AM2020, AFP1010, NFS-640, AFP-400, AFP-300, AFP-200,AFP-100 and System 5000 (equipped with an AIM-200 module) toprotect the system against wire-to-wire short circuits on the SLC loops

Read More

Đầu báo khói nhiệt thường Model 2WT-B, 4WT-B

Thương hiệu: Systemsensor
Nhà phân phối: Hathanh TDIC.,JSC
Liên hệ Mr Đức: 0936.688.116
Email: kinhdoanhhathanh.jsc@gmail.com

Giới thiệu sản phẩm

The detector shall include a mounting base for mounting to 3½-inch and 4-inch octagonal, single-gang, and 4-inch square back boxes with A plaster ring, or direct mount to the ceiling using drywall anchors. Wiring connections shall be made by means of SEMS screws. The detector shall allow pre-wiring of the base and the head shall be a plug-in type. The detector shall have a nominal sensitivity of 2.5 percent per-foot nominal as measured in the UL smoke box. The detector shall be capable of automatically adjusting its sensitivity by means of drift compensation and smoothing algorithms. The detector shall provide dual-color LED indication that blinks to indicate power up, normal standby, out of sensitivity, alarm, and freeze trouble (Model 2WT-B, 4WT-B) conditions. When used in conjunction with the 2W-MOD2 module, 2-wire models shall include a maintenance signal to indicate the need for maintenance at the alarm control panel and shall provide a loop testing capability to verify the circuit without testing each detector individually.

 

Read More

Tủ nguồn FCPS-24S6E loại 6.0 apm 240VAC

Xuất xứ: Notifier
Nhà phân phối: Hathanh TDIC.,JSC
Liên hệ Mr Đức: 093.66.88.116
Email: kinhdoanhhathanh.jsc@gmail.com
Giới thiệu sản phẩm:

The FCPS-24S6E (6-amp) and FCPS-24S8E (8-amp) are remote power supplies with battery charger. The FCPS-24S6/-24S8 may be connected to any 12 or 24 volt fire alarm control panel (FACP) or may be used as stand-alone supplies. Pri-mary applications include notification appliance (bell) circuit (NAC) expansion (to support ADA requirements and NAC syn-chronization) or auxiliary power to support 24 volt system accessories. The FCPS-24S6/-24S8 provides regulated and filtered 24 VDC power to four notification appliance circuits configured as either four Class B (Style Y) or Class A (Style Z,with ZNAC-4 option module). Alternately, the four outputs may be configured as all non-resettable, all resettable or two non-resettable and two resettable. The FCPS-24S6/-24S8 also contains a battery charger capable of charging up to 18 AH batteries. FCPS-24S6C &FCPS-24S8C are ULC-listed.

NOTE:

Unless otherwise specified, the terms FCPS-24S6 and FCPS-24S8 used in this document refers to the standard FCPS-24S6 and FCPS-24S8, FCPS-24S6C and FCPS-24S8C, theFCPS-24S6E and FCPS 24S8E

Read More

Nút ấn địa chỉ M700K

Xuất xứ: Notifier
Nhà phân phối: Hathanh TDIC.,JSC
Liên hệ Mr Đức: 093.66.88.116
Email: kinhdoanhhathanh.jsc@gmail.com
Giới thiệu sản phẩm:

Il pulsante analogico manuale a rottura di vetro per interni serie M700K è stata progettato per essere utilizzata come stazione di allarme manuale in un sistema di rivelazione incendio. Sono disponibili 2 modelli, M700K e M700KI, quest’ ultimo è dotato di circuito isolatore. La serie M700K include un modulo indirizzabile che provvede all’interfacciamento con le centrali analogiche NOTIFIER.

Read More