Chủ Nhật, 21 tháng 6, 2015










Nhà sản xuất: Honeywell
Nhà phân phối: Hathanh TDIC., Jsc
Liên hệ: Mr Đức 093.66.88.116
Email: kinhdoanhhathanh.jsc@gmail.com

Mô tả  
TÍNH NĂNG
- Listed to UL 268, ULC CAN/ULC S529.
- Transmitter/receiver built into same unit 
- Six user-selectable sensitivity levels.
- 16' to 328' (use BEAMLRK beyond 230') protection range  
- Removable plug-in terminal blocks.  
- Digital display — no special tools required.
- Built-in automatic gain control compensates for signal deterioration from dust buildup.  
- Optional remote test station  
- Optional long-range kit (BEAMLRK) for applications in excess of 230' (70 m).
- Optional multi-mount kit (BEAMMMK) providing ceiling or wall mount capability with increased angular adjustment.
- Optional heater kits (BEAMHK and BEAMHKR) for prevention of condensation (not intended to increase or reduce the specified operating temperature).  
ĐẶC TÍNH KỸ THUẬT          
- Voltage: 15 to 32 VDC.
- Average Standby Current (24 VDC): 2 mA maximum (LED flashing, SLC @ 24 V).  
- LED Current: 6.5 mA maximum.  
- Remote Annunciator Current: 11.2 mA maximum.
- Average Current During Testing: 500 mA maximum.  
- Alarm Current (24 VDC): 8.5 mA maximum (LED on).
- Trouble/fault Current (24 VDC): 4.5 mA maximum (LED on).
- Fault Condition Current (add to standby current): 100 mA maximum.  
- Alignment Mode Current (24 VDC): 20 mA maximum.
- External Supply (FSB-200S only): Voltage 
- 15 to 32 VDC; Current - 0.5 A maximum.
- Remote Output (alarm): Voltage 
- 15 to 32 VDC (NOTE: Output voltage is the same as device input voltage.); Current: 15 mA maximum, 6 mA minimum (NOTE: Output current is limited by 2.2K ohm resistor.).  
- Heater Kit BEAMHK: Voltage - 15 to 32 V; Current - 92 mA maximum @ 32 V (heater only); Power Consumption - nominal 1.6 W @ 24 V, maximum 3.0 W @ 32 V.  
- Reflector Heater Kit BEAMHKR: Voltage - 15 to 32 V; Current 
- 450 mA maximum @ 32 V (per reflector); Power Consumption (per reflector) 
- nominal 7.7 W @ 24 V, maximum 15.0 W @ 32 V.
- Detector Dimensions: 10.0" H x 7.5" W x 3.3" D (254 mm H x 191 mm W x 84 mm D).      

0 nhận xét:

Đăng nhận xét