Đầu báo khói quang kết hợp nhiệt địa chỉ Notifier FAPT-851

Nhà sản xuất: Honeywell
Mã sản phẩm: FAPT-851
Nhà phân phối: Hathanh TDIC., Jsc
Liên hệ: Mr Đức 093.66.88.116
Email: kinhdoanhhathanh.jsc@gmail.com
Mô tả

TÍNH NĂNG

- Automatically adjusts sensitivity levels without operator intervention or programming. Sensitivity increases with heat.

- Microprocessor-based, combination photo and thermal technology.

- FlashScan® and CLIP system compatible (NFS-320, NFS-640, NFS2-640, NFS-3030 and NFS2-3030)

- Addressable-analog communication

- Sleek, low-profile design

- Two-wire SLC connection.

- Direct-Dial entry of address: (1 – 159 on FlashScan systems; 1 – 99 on CLIP systems).

- Addresses can be viewed and changed without electronic programmers.

- Dual bi-color LED design provides 360° viewing angle.

- LEDs lock red when in alarm. In FlashScan, LEDs flash green in standby for normal condition.

- Built-in tamper-resistant feature

- Constructed of off-white fire-resistant plastic, designed to commercial standards, and offers an attractive appearance.

- SEMS screws for wiring of the separate base.

- Several base options, including relay, isolator, and sounder.

- Built-in functional test switch activated by external magnet.

- Listed to UL 268.

- Capable of heat-only alarm mode, enabled by a special command from the panel. Smoke alarms are ignored.

- Low-temperature signal at 45°F +/– 10°F (7.22°C +/– 5.54°C).

ĐẶC TÍNH KỸ THUẬT      

- Voltage range: 15 – 32 volts DC peak.

- Standby current (max. avg.): 300 μA.

- Loop resistance: 50 ohms maximum; varies according to control panel used. Refer to panel installation manuals.

- LED current (max.): 6.5 mA @ 24 VDC (“ON”).

- Operating temperature: 0°C to 38°C (32°F to 100°F).

- Thermal sensing rating: fixed-temperature setpoint 135°F (57°C).